Filter
Top Products
5–42 Maintenance and Service Guide
Removal and Replacement Procedures
7. Position the docking station with the left side toward you.
✎
Make sure the docking stand and pivot arm are supported
before removing the following screws. The docking stand and
pivot arm can fall if not supported.
8. Remove the following screws:
1 Two PM2.5×8.0 screws that secure the cable bracket to the
bottom case.
2 One PM2.5×11.0 screw that secures the pivot arm hinge
to the bottom case.
3 Three PM2.5×8.0 screws that secure the pivot arm hinge
to the bottom case.
9. Remove the docking stand and pivot arm
4.
Removing the Docking Stand and Pivot Arm