Filter
Top Products
Maintenance and Service Guide 5–1
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Torx T8 and Phillips P0 screws are removed during the
disassembly of the tablet PC and the docking station. There are
38 screws, in 4 different sizes, that may have to be removed,
replaced, and loosened when servicing the tablet PC. There are
20 screws, in 4 different sizes, that must be removed and replaced
when servicing the docking station. Make special note of each
screw size and location during removal and replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.