Filter
Top Products
i
Release Notes: Version M.10.72 Software
for the HP ProCurve Series 3400cl Switches
"M” software versions are supported on these switches:
Release M.10.41 supports the ProCurve Switch 3400cl-24G (J4905A), and 3400cl-48G (J4906A).
These release notes include information on the following:
■ Downloading switch software and documentation from the Web (page 1)
■ Clarification of operating details for certain software features (page 20)
■ A listing of software enhancements in recent releases (page 25)
■ A listing of software fixes included in releases M.08.51 through M.10.72 (page 145)
IMPORTANT:
3400cl switches MUST be running ROM version I.08.12 prior to loading M.10.20 or newer software. If your
switch is using a software version earlier than M.10.10, you need to install and boot the M.10.10 software
(included in the M.10.41 software package) to load the I.08.12 ROM version, before installing M.10.20 or
newer.
Security Note:
Downloading and booting software release M.08.89 or greater for the first time automatically enables
SNMP access to the hpSwitchAuth MIB objects. If this is not desirable for your network, ProCurve
recommends that you disable it after downloading and rebooting with the latest switch software. For more
information, refer to “Enforcing Switch Security” on page 10 and “Using SNMP To View and Configure
Switch Authentication Features” on page 35.
Configuration Compatibility Caution:
Configuration files created or saved using version M.10.65 or higher are NOT backward-compatible with
previous software versions. The user is advised to save a copy of the pre-M.10.65 startup-config file
BEFORE UPDATING to M.10.68 or greater, in case there is ever a need to revert back to an earlier version
of software.
ProCurve Switch M.08.51 through
M.08.95
M.08.99.x
and newer
M.08.96, M.08.97,
M.10.01
and newer
ProCurve Switch 3400cl-24G (J4905A)
ProCurve Switch 3400cl-48G (J4906A)
✔
✔
✔
✔
ProCurve Switch 6400cl-6XG 10-GbE CX4(J8433A)
ProCurve Switch 6410cl-6XG 10-GbE X2(J8474A)
✔
✔
✔
✔