Filter
Top Products
77
Enhancements
Release M.10.04 Enhancements
Note
The router rip command exists in previous software versions. In this implementation, however, RIP
must be enabled in order to open the port on the switch.
Enabling/Disabling Stacking
To enable/disable stacking, use the following command.
Note
The stack command exists in previous software versions. In this implementation, however, both
stacking and SNMP must be enabled to open the port on the switch. If either feature is disabled, the
port will remain closed.
Spanning Tree Show Commands
The show spanning-tree detail command previously displayed 802.1D (STP) and 802.1w (RSTP) status
and counters for all ports on the switch. Beginning with software release M.10.04, this command
provides 802.1s (MSTP) multi-instance spanning tree details and displays additional parameters to
enhance spanning-tree reporting via the CLI.
Syntax: [no] stack
Enables stacking (SNMP) on the switch. (Default: disabled)