Filter
Top Products
145
Software Fixes in Release M.08.51 - M.10.72
Release M.08.52
Software Fixes in Release M.08.51 - M.10.72
Software fixes are listed in chronological order, oldest to newest. To review the list of fixes included
since the last general release that was published, go to “Release M.10.21” on page 165.
Unless otherwise noted, each new release includes the software fixes added in all previous releases.
Release M.08.51 was the first software release for the HP ProCurve 3400cl Series.
Release M.08.52
Updated Boot ROM image to I.08.02 to address Manufacturing test condition.
Release M.08.53 (Never Released)
■ Updated Boot ROM image to I.08.03 to address Manufacturing test condition.
Release M.08.54
■ First release to fully support LR and CX4 transceivers installed in the optional cl Module
(J8434A and J8435A).
Release M.08.55 - Release M.08.60
Releases M.08.55 through M.08.60 were never built.
Release M.08.61
Problems Resolved in Release M.08.61
■ 802.1s (PR_1000207608) — After the root bridge is agreed, the non-root switch continues
to send out BPDUs claiming to be Root, resulting in possible instability in the STP topology.
■ ACL (PR_1000207620) — TCP and UDP traffic is sometimes incorrectly permitted through
an ACL.
■ CDP (PR_1000195343) — Entering the command show cdp neighbor detail x (where x is
the port number) displays details for all active ports with CDP neighbors whose numbers
begin with x. Only occurs when the detail parameter is included.
■ CDP/LLDP (PR_1000201275) — The CDP/LLDP text output has been improved with the
following two changes:
1. In show LLDP config output, LLDP refresh interval is renamed to LLDP Transmit
Interval.