Filter
Top Products
156
Software Fixes in Release M.08.51 - M.10.72
Release M.08.90
• RADIUS Configuration via SNMP. For details refer to “Using SNMP To View and
Configure Switch Authentication Features” on page 35.
■ Port Security (PR_1000304202) — The port-security MAC address learn mode does not
function correctly between 'port-security' ports.
■ SNMP (PR_1000310841) — User can assign illegal values for CosDSCPPolicy through
SNMP. All other user-interfaces for configuring QoS function correctly.
Release M.08.90
Problems Resolved in Release M.08.90 (Not a general release)
■ Crash/log (PR_1000282359) - When searching the log for an extremely long string, the
switch may crash with a bus error similar to:
PPC Bus Error exception vector 0x300: Stack Frame=0x0c8c1a70 HW
Addr=0x6a73616c IP=0x007d3bc0 Task='mSess1' Task ID=0xc8c2920 fp:
0x6b61736a sp:0x0c8c1b30 lr:0x007d3b28.
■ MSTP Enhancement (PR_1000310463) - Implemented new CLI command “spanning-tree
legacy-path-cost”. See “MSTP Default Path Cost Controls” on page 38 for details.
Release M.08.91
Problems Resolved in Release M.08.91 (Never released)
■ MSTP Enhancement (PR_1000313986) - Implemented new CLI command, "spanning-tree
legacy-mode".
■ RADIUS (PR_1000316158) - After a switch reboot, the switch does not recognize a
response from a RADIUS or TACACS server.
■ Performance Enhancement (PR_1000291806) - Allow user configuration of the packet
buffer queuing mode. For details, see “QoS Pass-Through Mode” on page 39.
Release M.08.92
Problems Resolved in Release M.08.92 (Not a general release)
■ Config (PR_1000298146) — Enabling QoS pass-through Mode causes incorrect informa-
tion to be displayed in the "show configuration" command.