Filter
Top Products
You can use the printer display to retrieve information about your wireless network, establish a wireless
connection, and more.
How do I? Instructions
Print network configuration page.
The network configuration page will display the network status,
hostname, network name, and more.
1. Press the Wireless button to access the
Wireless Settings menu.
2. Select Print Report, and then select
Configuration Page.
Print wireless network test report.
The wireless network test report will display the diagnostics results for
the status of the wireless network, wireless signal strength, detected
networks, and more.
1. Press the Wireless button to access the
Wireless Settings menu.
2. Select Print Report, and then select Test
Report.
Restore network settings to default settings. 1. Press the Wireless button to access the
Wireless Settings menu.
2. Select Restore to Default.
3. Confirm selection to restore defaults.
Turn wireless on or off. 1. Press the Wireless button to access the
Wireless Settings menu.
2. Select Wireless.
3. From the Wireless On/Off menu select On
or Off.
Establish a Wi-Fi Protected Setup (WPS) connection.
WiFi Protected Setup (WPS – requires WPS
router)
Status lights
• Wireless status light
•
On button light
Wireless status light
Light behavior Solution
Off Wireless is off. Press Wireless button to access
wireless menu on the printer display. Use
wireless menu to enable wireless printing.
Slow blinking Wireless is on but not connected to a network. If
connection cannot be established, make sure
printer is within range of wireless signal.
Fast blinking Wireless error has occurred. Refer to messages
on printer display.
On Wireless connection has been established and
you can print.
On button light
Light behavior Solution
Off The printer is powered off.
Status lights 7