Filter
Top Products
Covers and Doors
Back Cover
1 Unplug the power cord and remove the parallel cable from the back of the printer.
2 Remove the toner cartridge.
3 Lift the Input Extender assembly.
Caution You must lift the Input Extender when the covers are removed or it will break. After
you have removed the covers, leave the Input Extender in this lifted position for
ease of replacement.
4 Remove the (3) screws (Figure 6-2, callout 1).
Back Cover Removal (1 of 2)
Figure 6-2
6 - 6 Removal and Replacement