HP (Hewlett-Packard) 7115w Computer Drive User Manual


 
1-21
Installing the Tape Library
Step 5: Set the SCSI Interface Mode Switch
Installation
The following table shows connection options when there are no other peripherals.
Table 1-5 Tape Library as the Only Peripheral
Configuration Cabling Mode Switch Settings
One-Drive Tape
Library
Two-Drive Library:
Daisy chained
Minimum host I/O
slots used
Two-Drive Library
Bus 1 and bus 2
connect to separate
SCSI cards
Maximum
performance
Additional card and
cable required
Single-ended SCSI
connection
Single-ended
SCSI connection
shown
Differential SCSI
connection shown