HP (Hewlett-Packard) 7115w Computer Drive User Manual


 
3-29
Operating the Library
Retrieving Performance Information
Library Operation
Table 3-5 Information Logs
Log Name Description
REVISION Displays the library’s firmware revision number.
LIB ODOMETERS * Press
ENTER to select the odometer logs.
HOURS # Number of operation hours (time during which power was
on). Some time may have been spent in power reduction
mode.
MOVES # Total number of moves and move attempts by the
cartridge transport mechanism.
XLATES # Total number of cartridge transport mechanism horizontal
moves.
DRIVE LOADS * Press
ENTER to select the logs described in the next few rows.
DRIVE 1 Number of tape cartridge loads for drive 1.
DRIVE 2 Number of tape cartridge loads for drive 2 (two drive
library only).
DRIVE FW * Press
ENTER to select the firmware revision of the drive you want to see.
D1
REVISION # Firmware revision of drive 1.
D2
REVISION # Firmware revision of drive 2 (two drive library only).
INTERFACE FW * Press
ENTER to select the Interface board revision.
BUS NUM = Press
NEXT or PREV to display the interface bus number to
select, then view:
FAST WIDE
SCSI Displays the interface type.
8052
Rev # Displays the 8052 firmware.
8052 CKSUM # Displays the 8052 checksum revision.
COBRA REV# Displays the revision of the interface chip (Cobra).