Filter
Top Products
Set up and use fax10
Step 3: Congure fax settings
Change the printer’s fax settings to meet
your needs after you have connected the
printer to a phone line.
Note: To use the same fax resolution
and lighter/darker settings for all faxes
sent from the printer, congure the
settings as you wish, and then touch
Set as New Defaults.
If you want to congure this setting… …do this:
Auto Answer
Set the answer mode to On if you want the
printer to automatically answer incoming
calls and receive faxes. The printer will
answer these incoming calls after the
number of rings that has been specied in
the Rings to Answer setting.
1. Touch right arrow
and then touch
Setup.
2. Touch Fax Setup, and then touch Basic
Fax Setup.
3. Touch Auto Answer, and then touch
ON.
Rings to Answer (Optional)
Set the number of rings to answer
Note: The number of rings to answer
for the printer should be greater than
the number of rings to answer for the
answering machine.
1. Touch right arrow
and then touch
Setup.
2. Touch Fax Setup, and then touch Basic
Fax Setup.
3. Touch Rings to Answer.
4. Touch up arrow
or to change the
number of rings.
5. Touch Done, to accept the setting.
Where can I change fax
settings?
You can congure fax settings using
the following tools:
Printer’s control panel
Touch the Setup button on the printer’s
control panel, touch Fax Settings, and
then touch the setting you want to
congure.
HP software
If you have installed the HP software
on your computer, you can congure
fax settings using the software that was
installed on your computer.
For more information about using these
tools or settings, see the user guide.