Filter
Top Products
Set up and use fax 11
English
If you want to congure this setting… …do this:
Distinctive Ring
Change the answer ring pattern for
distinctive ring
Note: If you are using a distinctive
ring service, you can use more than
one telephone number on the same
telephone line. You can change
this setting to enable the printer to
determine automatically which ring
pattern it should use for fax calls only.
Tip: You can also use the Ring Pattern
Detection feature in the printer’s
control panel to set distinctive
ring. With this feature, the printer
recognizes and records the ring
pattern of an incoming call and,
based on this call, automatically
determines the distinctive ring pattern
assigned by your telephone company
to fax calls.
1. Touch right arrow
and then touch
Setup.
2. Touch Fax Setup, and then touch
Advanced Fax Setup.
3. Touch Distinctive Ring.
4. A message appears stating that this
setting should not be changed unless
you have multiple phone numbers on
the same telephone line. Touch Yes to
continue.
5. Do one of the following:
• Touch the ring pattern assigned by
your telephone company to fax calls.
Or
• Touch Ring Pattern Detection, and
then follow the instructions on the
printer’s control panel.
Note: If you are using either a PBX
phone system that has different ring
patterns for internal and external calls,
you must call the fax number from an
external number.
Fax Speed
Set the fax speed used to communicate
between the printer and other fax machines
when sending and receiving faxes.
Note: If you experience problems
sending and receiving faxes, try using
a lower fax speed.
1. Touch right arrow
and then touch
Setup.
2. Touch Fax Setup, and then touch
Advanced Fax Setup.
3. Touch down arrow
, and then touch
Fax Speed.
4. Touch to touch Fast, Medium, or Slow.
Fax Error Correction Mode
If the printer detects an error signal during
the transmission and the error-correction
setting is turned on, the printer can request
that a portion of the fax be resent.
Note: If you have problems sending
and receiving faxes, turn off error
correction. Also, turning off this setting
might be useful when you are trying to
send a fax to another country/region
or receive a fax from another country/
region or if you are using a satellite
phone connection.
1. Touch right arrow
and then touch
Setup.
2. Touch Fax Setup, and then touch
Advanced Fax Setup.
3. Touch down arrow
, and then touch
Error Correction Mode.
4. Select On or Off.