HP (Hewlett-Packard) 940c All in One Printer User Manual


 
61
6.
Remove the replacement print cartridge from its packaging and carefully
remove the protective vinyl tape.
Caution!
Do not touch the print cartridge ink nozzles or copper
contacts. Touching these parts will result in clogs, ink failure, and bad
electrical connections. Do not remove the copper strips. They are
required electrical contacts.
1. black cartridge 2. color cartridge 3. ink nozzles 4. copper contacts–do not touch or
remove the copper contacts 5. protective vinyl tape–remove only the protective vinyl tape
7.
Insert the print cartridge firmly into the cradle. Secure the cradle latch.
You hear a click when the latch is fully secured.
8.
Close the top cover.
If the Print Cartridge Status light continues to blink after installing a new
print cartridge, check the part number on the cartridge to verify that the
correct cartridge is installed.
9.
Align the print cartridges for optimum print quality.
See also:
aligning print cartridges
print cartridge part numbers