Filter
Top Products
1
Internal drives - contents
Pre-Installation
Before you start page 3
Backup software and drivers page 5
Using the CD-ROM page 7
Installing the tape drive
Step 1: Check the SCSI connection page 9
Step 2: Check the drive’s SCSI ID page 11
Step 3: Prepare the mounting bay page 13
Step 4: Attach mounting hardware page 15
Step 5: Install the drive page 17
Step 6: Attach power and SCSI cables page 19
Step 7: Secure the drive page 21
Step 8: Verify installation page 23
Using the tape drive
Your HP StorageWorks Ultrium tape drive page 25
Use the correct media page 27
Register your tape drive page 29
Using HP OBDR page 31
Diagnostic tools page 33
Optimizing performance page 35
Troubleshooting page 37
Understanding the LEDs page 42
Problems with cartridges page 46
Other sources of information page 48
Replacing your tape drive page 49
ult960_master_internal.fm Page 1 Tuesday, September 21, 2004 4:13 PM