Filter
Top Products
Set the dial tone detection
Normally, the product begins dialing a fax number immediately. If you are using the product on the
same line as your telephone, turn on the detect-dial-tone setting. This prevents the product from sending
a fax while someone is on the telephone.
The factory-set default for detect dial tone is On for France and Hungary, and Off for all other
countries/regions.
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Detect Dial Tone button, and then touch the On or Off button.
Tone dial or pulse dial
Use this procedure to set the product to tone-dialing or pulse-dialing mode. The factory-set default is
Tone. Do not change this setting unless you know that the telephone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Dialing Mode button, and then touch the Tone or Pulse button.
Set autoredial options
If the product was unable to send a fax because of a communication error or the receiving fax machine
did not answer or was busy, the product attempts to redial based on the redial-on-busy, redial-on-no-
answer, and redial-on-communication-error options.
Set the redial-on-busy option
If this option is on, the product redials automatically if it receives a busy signal. The factory-set default
for the redial-on-busy option is On.
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Redial if Busy button, and then touch the On or Off button.
118 Chapter 7 Fax ENWW