Filter
Top Products
5. Remove the front section of the bottom cushion (Callout 2) and the ramp. (callout 1,
Figure 3-3)
Figure 3-3 Removing the Ramp and Front Cushion
6. Attach the ramp to the plywood deck using the hook-and-loop. (Callout 1, Figure 3-4)
NOTE: Box clamps must be folded out of the way to lay the ramp down.
Figure 3-4 Attaching the Ramp
WARNING! The HP Workgroup System weighs 300+ pounds. To avoid injury, you might
require a second person to assist you with this step.
7. Gently roll the unit down the ramp. (Callout 1, Figure 3-5)
16 Hardware Setup