Filter
Top Products
Example 6-2 Modify Database
4. (Optional) Edit the file /etc/sysconfig/netinfo to reflect the correct external network
information and MAC address.
Example 6-3 Sample netinfo File
5. Run the configuration scripts with the command service nconfig nconfigure.
6. Restart the network with the command service network restart.
6.3 Lost Connection to the iLO
If iLO2 is not responding to the browser, click Reset on the Diagnostic page of the iLO 2 browser
interface.
6.4 Removing a Bad Golden Image
To remove the golden image, follow these steps:
1. Login to the head node root user account.
2. Enter the following command:
# si_image base_image
3. Go back to cluster_config and rerun it.
4. Rerun cluster_config and make sure it successfully runs to completion before attempting
to touch the keyboard or mouse again.
5. Enter the following command:
# sys_start image_and_reboot
42 Troubleshooting