Filter
Top Products
6. Follow the onscreen instructions to complete all the installation steps, including
the Setup Assistant.
When you have finished installing the software, the HP All-in-One is ready for use.
7. To test your network connection, go to your Mac and print a self-test report to the
HP All-in-One.
Load originals and load paper
You can copy or scan up to letter- or A4-size originals by loading them on the glass.
To load an original on the glass
1. Lift the lid on the HP All-in-One.
2. Load your original print side down in the right front corner of the glass.
Tip For more help on loading an original, refer to the engraved guides along
the edge of the glass.
3. Close the lid.
To load full-size paper
1. Pull out the input tray, and then slide the paper-width and paper-length guides to
their outermost positions.
2. Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
– Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
– Make sure all the paper in the stack is the same size and type.
Chapter 1
10 HP Photosmart C5100 All-in-One series
HP All-in-One overview