Filter
Top Products
Pulse Dialing. Contact your local telephone company if you are unsure which setting to
use.
NOTE: If you select Pulse Dialing, some phone system features might not be
available. It can also take longer to dial a fax or phone number.
NOTE: This feature is not supported in all countries/regions. If it is not supported in
your country/region, Tone or Pulse Dialing does not appear in the Basic Fax
Setup menu.
To set tone or pulse dialing from the control panel
1. Press Setup.
2. Press
to highlight Basic Fax Setup, and then press OK.
3. Press
to highlight Tone or Pulse Dialing, and then press OK.
4. Press
to select Tone Dialing or Pulse Dialing, and then press OK.
Set the fax speed
You can set the fax speed used to communicate between the HP All-in-One and other
fax machines when sending and receiving faxes. The default fax speed varies by country/
region.
If you use one of the following, setting the fax speed to a slower speed might be required:
• An Internet phone service
• A PBX system
• Fax over Internet Protocol (FoIP)
• An integrated services digital network (ISDN) service
If you experience problems sending and receiving faxes, you might want to try setting the
Fax Speed setting to Medium (14400) or Slow (9600).
To set the fax speed from the control panel
1. Press Setup.
2. Press
to highlight Advanced Fax Setup, and then press OK.
3. Press
to highlight Fax Speed, and then press OK.
4. Press
to select one of the following settings, and then press OK.
Fax speed setting Fax speed
Fast (33600) v.34 (33600 baud)
Medium (14400) v.17 (14400 baud)
Slow (9600) v.29 (9600 baud)
Computer connection information
The HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also connect the HP All-in-One to either a wired
or wireless network. If you insert an HP bt450, Printer and PC Adapter with Bluetooth
®
Chapter 4
30 Finish setting up the HP All-in-One
Finish setup