Filter
Top Products
Norway www.hp.no/faxconfig
Ireland www.hp.com/ie/faxconfig
France www.hp.com/fr/faxconfig
Italy www.hp.com/it/faxconfig
This section contains the following topics:
•
Change settings on the HP All-in-One to receive faxes
•
Test your fax setup
•
Set the fax header
•
Set up speed dialing
Related topics
“
Use the fax features” on page 131
Change settings on the HP All-in-One to receive faxes
In order to receive faxes successfully, you might need to change some settings on the
HP All-in-One. If you are unsure which setting to choose for a specific fax option, refer to
the detailed fax setup instructions provided in the printed documentation.
This section contains the following topics:
•
Set the answer mode
•
Set the number of rings before answering
•
Change the answer ring pattern for distinctive ringing
Set the answer mode
The answer mode determines whether the HP All-in-One answers incoming calls or not.
• Turn on the Auto Answer setting if you want the HP All-in-One to answer faxes
automatically. The HP All-in-One will answer all incoming calls and faxes.
• Turn off the Auto Answer setting if you want to receive faxes manually. You must
be available to respond in person to the incoming fax call or the HP All-in-One will not
receive faxes.
To set the answer mode
▲ Press Auto Answer to turn the light on or off, as appropriate for your setup.
When the Auto Answer light is on, the HP All-in-One answers calls automatically.
When the light is off, the HP All-in-One does not answer calls.
Set the number of rings before answering
If you turn on the Auto Answer setting, you can specify how many rings should occur
before the HP All-in-One automatically answers the incoming call.
The Rings to Answer setting is important if you have an answering machine on the same
phone line as the HP All-in-One, because you want the answering machine to answer
the phone before the HP All-in-One does. The number of rings to answer for the HP All-
in-One should be greater than the number of rings to answer for the answering machine.
Chapter 4
(continued)
62 Finish setting up the HP All-in-One
Finish setup