Filter
Top Products
Table 5 BIOS IDs for G2 products (continued)
596142-B21D2D2504i G2
595249-B21D2D4106i G2
595882-B21D2D4106fc G2
595248-B21D2D4112 G2
581971-B21D2D4312 G2
635236-B21D2D4324 G2
5. Exit RBSU and add the iLO2 license.
a. Log on to the iLO2 GUI.
b. Select the Administration Tab.
c. Select Licensing and enter the recorded licence key in the section marked Enter License
Activation Key.
6. HP D2D4324/4312 only: Add the SAAP license for the integral P410i RAID card.
a. Reboot the system.
b. During the POST screen, when advised, hit any key to see further messages.
c. Enter the Smart Array POST ORCA utility by pressing [F8] when advised during the POST
messages.
d. Select the Manage Licenses option in the Smart Array menu, and then select Install Licenses.
e. Enter the licence key previously noted.
G1 products
All G1 products require a BIOS ID, but there are no other settings (or licenses). There is a special
utility that allows you to edit the BIOS ID. It is called Setsys Utility for HP D2D Backup Systems (for
USB Key-Media).
1. Download Setsys Utility for HP D2D Backup Systems (for USB Key-Media) from the relevant
product site at http://www.hp.com/support/downloads (under Storage — Disk Storage
Systems — Disk to disk Backup — HP D2D Backup Systems).
2. Follow the instructions in the Release Notes to run the utility and change the BIOS ID, as shown
in the following table.
Table 6 BIOS IDs for G1 products
BIOS ID numberModel
539194-B21D2D2502i G1 (and Smart Buy)
482301-B21D2D2503i (and Smart Buy)
539195-B21D2D2504i G1 (and Smart Buy)
482302–B21D2D4004i and D2D4009i
482303-B21D2D4004fc and D2D4009fc
512768-B21D2D4112 G1
22 Replacing the system motherboard