Filter
Top Products
Parameters:
● CYCLES — Number of passes
Printhead rest time (PH REST TIME)
Use this option to define the amount of time the printing carriage will pause between passes for the
selected media type.
Parameters:
● TIME — Time in minutes and seconds
Printhead temperature rest (PH TEMP REST)
Use this option if you want printing to pause if there is a gap between the set temperature of the media
print heater and the printhead temperature is too high.
Parameters:
●
ON — Pauses printing
●
OFF — Printing continues
Deleting a media type (DELETE MEDIA)
Use this option to delete a registered media type.
Media types from 02 to 20 can be selected. Media type 01 is defined as the standard media and cannot
be deleted. For details, see How do I...
Manage media types.
Copying a media type (COPY MEDIA)
Use this option to copy a registered media type. For details, see How do I... Manage media types.
Pasting a media type (PASTE MEDIA)
Use this option to paste a media that you have copied over a registered media type. For details, see
How do I...
Manage media types.
Default values for media types
Your printer comes with a set of factory-installed media types. Except for media type 01, you can modify
or delete all other media types The table below lists the default values for the factory-installed media
types.
156 Chapter 14 Tell me about front panel menus ENWW