Filter
Top Products
NOTE When printing without using the take-up reel, make sure the media or printing surface
is not damaged or folded by the take-up reel sensor.
Define the take-up reel winding mode
The take-up reel supports two winding modes; tension winding and loose winding.
By default, use LOOSE winding mode. Always use TENSION winding mode when printing long plots or
if you have problems with skew.
NOTE The HP Designjet High Speed Dryer is not usable with the take-up reel when in
TENSION winding mode. Please use LOOSE mode when using the HP Designjet High Speed
Dryer.
To set the winding mode:
●
Loose: place the take-up reel roller in the top position.
1. Tension roller
ENWW Use the take-up reel 41