Filter
Top Products
To change the printhead height on the front panel:
1. Press the ONLINE key.
2. Press the ▼ key to display the MEDIA REG menu.
3. Scroll to the PH HEIGHT VAL option and press the OK key.
4. Select NORMAL or HIGH, according to the mechanical change you have made, and press the OK
key.
Parameters: NORMAL (default) or HIGH (for thick media).
NOTE When the printhead height is changed, a gap in printing may occur in bidirectional
printing. Adjust the correction value for bidirectional printing. See How do I...
Perform printhead
position adjustment.
64 Chapter 5 How do I… (ink topics) ENWW