Filter
Top Products
6 How do I maintain the printer?
This section describes the regular inspection and maintenance procedures to be performed by users.
● Regular maintenance guide
● Daily printhead maintenance
●
Leave the printer off for two to four weeks
●
Leave the printer off for less than two weeks
● Charge the ink system
● Clean the exterior of the printer
●
Clean the rear cover and media feed
●
Clean the platen
● Replace the waste ink bottle
● Normal printhead recovery
●
IQ Print
Regular maintenance guide
The printer requires regular inspection and maintenance. The table below lists all regular inspection and
maintenance procedures. For details on each procedure, see the page reference.
WARNING! Never switch off the printer without following the correct procedures. Even with
the storage liquid installed, never leave the printer off for more than 4 weeks. Leaving your
printer off for more than 4 weeks can cause permanent damage that cannot be repaired. In all
other cases make sure you observe the appropriate maintenance guidelines.
ENWW Regular maintenance guide 65