Filter
Top Products
CAUTION The level in the HP waste ink bottle must be checked by visual inspection to
prevent overflow. If the waste ink level is above the indication line, the bottle must be replaced
with an empty HP waste ink bottle.
NOTE Place a sheet of paper under the HP waste ink bottle on the floor when removing a
bottle containing waste ink. This will help clean up any ink spills. If soaked with ink, treat the
paper as a combustible material and dispose of properly.
HP recommends that you always keep a spare empty HP waste ink bottle available. Some
maintenance procedures require installation of an empty HP waste ink bottle to prevent ink
overflow.
The HP waste ink bottle contains organic solvents and must be disposed of in compliance with
all local, state, and federal regulations. Always securely replace the cap on a full or partially-
full the HP waste ink bottle after removing it from the printer to prevent ink spills.
Ensure all operators are trained in the use of emergency equipment such as eye wash
stations and fire extinguishers and know where they are located.
NOTE Do not replace the waste ink bottle during printing.
The waste ink bottle must be checked on a daily basis to make sure that it is not full.
If full, it should be emptied as follows:
1. Loosen the screw and lift up the lever to release the waste ink bottle.
1. Screw
2. Lever
ENWW Replace the waste ink bottle 81