Filter
Top Products
12
english
print cartridges
using print cartridges
The printer uses the following print
cartridges:
For more information, see these sections
in the onscreen user’s guide:
• “checking the print cartridge status”
• “replacing print cartridges”
• “maintaining print cartridges”
• “print cartridge recovery”
replacing a print cartridge
To replace a print cartridge:
1. Press the Power button to turn on the
printer.
2. Open the top cover.
The print cartridge cradle moves to
the center of the printer.
3. Raise the cradle latch.
4. Lift the print cartridge out of the
cradle.
To return empty print cartridges to HP,
see “print cartridge recovery” in the
onscreen user’s guide.
5. Remove the replacement print
cartridge from its packaging and
carefully remove the plastic tape.
Hold the print cartridge so that the
copper strip is on the bottom.
1. pull tab to remove the plastic tape
Caution! To prevent clogs, ink failure, and
bad electrical connections, do not touch
the print cartridge ink nozzles or copper
contacts, and do not remove the copper
strips.
6. Push the print cartridge firmly into the
cradle.
7. Secure the cradle latch.
8. Verify that plain paper is loaded in
the In tray, then close the top cover.
print
cartridge
selection
number
product
number
black 51645
tri-color c6578
The printer automatically prints a
calibration page whenever a print
cartridge is replaced.
ᕡ
FDR_RG.book Page 12 Wednesday, July 31, 2002 9:38 AM