Filter
Top Products
18
english
troubleshooting: ethernet
Use the information in this section if you have problems setting up your HP printer with
its built-in ethernet feature. If you need help after the printer is set up, see the
electronic documentation.
The ethernet cable is not securely
connected.
Verify that the cable is securely connected to
the printer and hub or router. The cable snaps
into place when the connection is secure.
The ethernet cable is
connected to the printer, but
the Link light is off.
You are not using a CAT-5
ethernet cable.
Use a CAT-5 ethernet cable with a RJ-45 plug
to connect the printer to the network.
to solve the problem...
possible causes...
what is the problem?
The printer is not powered on. Press the Power button to power on the printer.
The ethernet hub or router is not
powered on or is
malfunctioning.
Verify that the hub or router is powered on.
Consult the documentation that came with the
hub or router to verify that it is working
properly.
The ethernet cable is broken.
Use a different ethernet cable to connect the
printer to the network.
FDR_RG.book Page 18 Wednesday, July 31, 2002 9:38 AM