Filter
Top Products
3.
Release the rear speaker cable (1) from the clips (2) and routing channel built into the
base enclosure.
4.
Remove the four Phillips PM2.5×4.0 screws (1) and the PM2.5×10.0 screw (2) that secure the
rear speaker to the computer.
5. Turn the computer right side up, with the front toward you.
6. Open the computer.
7. Release the rear speaker cable (1) from the opening in the base enclosure and the clips (2) and
(3) built into the base enclosure.
100 Chapter 4 Removal and replacement procedures