Filter
Top Products
7.
Release the ZIF connectors to which the following cables are attached, and then disconnect the
cables from the system board:
NOTE: The power button board cable, TouchPad button board cable, and fingerprint reader
board cable are included in the Cable Kit, spare part number 640422-001.
●
Power button board cable (1)
●
TouchPad button board cable (2)
●
Fingerprint reader board cable (3) (select models only)
8. Remove the seven Phillips PM2.5×6.0 screws that secure the top cover to the computer.
9. Lift the rear edge of the top cover (1) until the left and right sides disengage from the
base enclosure.
76 Chapter 4 Removal and replacement procedures