Filter
Top Products
To insert the battery:
1. Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.
2.
Pivot the front edge of the battery down into the battery bay until it is seated. (The battery release
latch will automatically lock into place.)
Optical drive
NOTE: The optical drive spare part kit includes a bezel and bracket.
Description Spare part number
DVD±RW and CD-RW Super Multi Double-Layer FX Combo Drive with LightScribe 641808-001
DVD±RW and CD-RW FX Combo Drive 659966-001
DVD±RW and CD-RW Super Multi Double-Layer FX Combo Drive with LightScribe 659967-001
Blu-ray ROM with LightScribe DVD ±R/RW Super Multi Double-Layer Drive for use only with
computer models equipped with an Intel processor
641824-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe 641809-001
Optical drive bay space saver (not illustrated) 659965-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 59).
Remove the optical drive:
1. Slide the service cover release latch to release the service cover.
60 Chapter 4 Removal and replacement procedures