![](http://pdfasset.owneriq.net/d/b5/db5e29e8-d18c-4383-93a4-48924e869231/db5e29e8-d18c-4383-93a4-48924e869231-bg6d.png)
8.
Remove the rear speaker (4) and cable.
9.
Remove the Phillips PM2.5×4.0 screw (1) that secures the front speaker to the base enclosure.
10. Remove the front speaker (2).
NOTE: When removing the front speaker, note the installation locations of two isolators (3).
Reverse this procedure to install the speakers.
Component replacement procedures
101