Filter
Top Products
Installing VisualDSP++ and the EZ-KIT Lite
1-2 Getting Started with ADSP-BF548 EZ-KIT Lite
Installing VisualDSP++ and the EZ-KIT Lite
If you have not already done so, install the ADSP-BF548 EZ-KIT Lite.
Ensure the board is disconnected from your PC, then install VisualDSP++
by following instructions in the VisualDSP++ Installation Quick Reference
Card, steps 1 to 3.
L
There are two USB interfaces on the ADSP-BF548 EZ-KIT Lite.
Be sure to use the debugger’s interface (labelled USB Debug Agent)
when connecting your computer to the board with provided USB
cable. The other USB interface (labelled USB-OTG) is for applica-
tions use.
Once the installation is complete, the amber LED (labeled MON, found
near the USB jack) is illuminated, indicating a successful physical connec-
tion between the PC and EZ-KIT Lite.
Install your license following instructions in the VisualDSP++ Installation
Quick Reference Card, step 4.