Filter
Top Products
4-8 ENWW
Replacing the printheads
You do not have to replace all four printheads when one needs to be replaced. Only replace
the color of printhead indicated.
You can check the status of the printheads from the Toolbox. You can also check the printer
control panel to see if a printhead needs to be replaced, as shown here.
To replace a printhead
1 Turn the printer power on, and then lift the printing supplies cover.
2 Open the printhead access latch by lifting the latch from the rear. Pull the latch forward
and down to release the hook from the carriage lock.
3 Pull the latch up and back to uncover the printheads.
The printhead needs to be replaced when the
Printhead light and a color indicator light are
on. The Resume light is also on.
You must replace the printhead to continue
printing.