Filter
Top Products
25319a
Figure 5 Ins talling the Brocade 4 Gb SA N Switch into an interconn ect
bay
4. Press the installation handle into the latch to lock the Brocade 4Gb SAN Switch
in place.
OA verifies power
As defined
earlier, the HP BladeSystem Onboard Administrator (OA) is the enclosure
management processor that manages the devices contained within the enclosure. The
OA provides a single point from which to perform basic management tasks on switches
or server blades installed in the enclosure.
IMPORTA
NT:
HP recom
mends reading the appropriate
HP BladeSystem Enclosure User Guide
and the
HP
BladeSystem Onboard Administrator User Guide
. Reading these guides in sequence will
promote an overall understanding of your specificenclosuremodel.
Once the switch is installed in the interconnect bay, the OA verifies that the switch
type matches the mezzanine cards present on the servers. If there is no mismatch, the
OA powers up the s witch.
If the switch does not power u p, check the enclosure and switch s tatus via the OA web
interface. Refer to the HP BladeSystem Onboard Administrator User G uide.
26 Setup