Filter
Top Products
Setting the dat
eandtime
Date and time a
re used for logging events. 4Gb SAN Switch operation does not
depend on the date and time; a switch with an incorrect date and time value will
function properly.
To set the date
andtimeusingtheCLI:
1. If you have no
t already done so, connect to the switch and log in as admin as
described in
Connect to the Command Line Interface.
2. Issue the date command using the following syntax:
date “mmddHHMMyy”
where:
• mm is the month; valid values are 01 through 12.
• dd is the date; valid values are 01 through 31.
• HH is the ho
ur; valid values are 00 through 23.
• MM is minutes; valid values are 00 through 59.
• yy is the year; valid values are 00 through 99 (values greater than 69
are inter
preted as 1970–1999, and values less than 70 are interpreted as
2000–2069) .
For example:
switch:a
dmin> date
Fri Jan 29 17:01:48 UTC 2000
switch:admin> date "0227123003
Thu Feb 2
712:30:00UTC2003
switch:admin>
For deta
ils about changing time zones, see the tsTimeZone command in the latest
versio
noftheFabric OS command reference guide.
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
33