Filter
Top Products
●
Print Density
● Paper type settings
● Print Modes
●
System Setup
●
Service
4. Click Apply to save the changes that you make on these pages.
NOTE If you have similar settings in the printer driver, those settings take priority over the
settings that are established in HP ToolboxFX.
Print color documents from my computer in black and white only
In the software program, select File, Print, the HP Color LaserJet 2605 or HP Color LaserJet
2605_dtn PCL6 print driver, click Properties, click the Color tab, and then select the Print in
Grayscale check box. Click OK to save the print properties, and then click OK again to print the
document.
Change color options
Use the Manual color adjustment to adjust the Color (or Color Map) options.
NOTE Some software programs convert text or graphics to raster images. In these cases,
the Photographs setting also controls the text and graphics.
Halftone options
Halftoning is the method by which the printer mixes the four primary colors (cyan, magenta, yellow,
and black) in varying proportions to create millions of colors. Halftone options affect the resolution
and clarity of your color output. The two halftone options are Smooth and Detail.
● The Smooth option provides better results for large, solid-filled print areas. It also enhances
photos by smoothing out fine color gradations. Choose this option when uniform and smooth
area fills are the most important attributes.
● The Detail option is useful for text and graphics that require sharp distinctions among lines or
colors, or images that contain a pattern or a high level of detail. Choose this option when sharp
edges and details are the most important attributes.
Edge Control
The Edge Control setting determines how edges are rendered. Edge Control consists of two
components: Adaptive Halftoning and Trapping. Adaptive Halftoning increases the edge sharpness.
Trapping reduces the effect of color-plane misregistration by slightly overlapping the edges of
adjacent objects. The following levels of edge control are available:
●
Off sets Trapping and Adaptive Halftoning to Off.
● Normal provides the default trapping settings. Adaptive Halftoning is set to On.
● Maximum provides the most trapping. Adaptive Halftoning is set to On.
98 Chapter 9 How do I? ENWW