Filter
Top Products
PostScript
Use the PostScript option when you are using the PostScript print personality. When the Print
PostScript error option is turned on, the PostScript error page automatically prints when PostScript
errors occur.
NOTE You must click Apply before your changes take effect.
Print quality
Use the HP ToolboxFX print-quality options to improve the appearance of your print jobs. These are
the same options that are available on the System setup and Print quality menu on the control
panel. For more information, see
Control panel menus.
The following options provided for controlling print quality are Color Calibration and Grayscale
Printing.
●
Color Calibration. The following options are available.
●
Power On Calibration
● Calibration Timing
● Calibrate Now
●
Grayscale Printing. The following options are available.
●
Resolution. Select 600 resolution for average print jobs and Fast Res 1200 for higher-
quality print jobs. Select ProRes 1200 for the highest-quality print job, but a longer printing
time.
● REt. You can turn on REt, which HP provides for improved print quality.
● Economode. Turn Economode on when you are printing average print jobs. Economode
reduces print quality, but increases the life of your print cartridge. To increase print quality,
turn Economode off. HP does not recommend full-time use of Economode.
NOTE You must click Apply before your changes take effect.
Print density
The print density settings allow you to make fine adjustments of the density (amount) of Cyan,
Magenta, Yellow, and Black toner in your images, pages, and documents.
●
Contrasts. Contrast is the density difference between light (highlight) and dark (shadow) colors.
To increase the difference between light and dark colors (equivalent to a negative highlight
adjustment and a positive shadow adjustment), use a positive contrast setting. To decrease the
difference between light and dark colors (equivalent to a positive highlight adjustment and a
negative shadow adjustment), use a negative contrast setting.
●
Highlights. Highlight colors are colors near white. To make highlight colors darker, use a
positive highlight setting, and to make highlight colors lighter use a negative highlight setting.
This adjustment does not affect midtone or shadow colors.
120 Chapter 10 Managing the printer ENWW