Filter
Top Products
7.
Press
(Left arrow) or
(Right arrow) to enter the first three digits of the IP address.
8.
Press
(Select) to save those digits and move to the next three digits of the IP address.
9.
Press
(Left arrow) or (Right arrow) to enter the next three digits of the IP address.
10.
Press
(Select) to save those digits and move to the next three digits of the IP address.
11.
Press
(Left arrow) or
(Right arrow) to enter the next three digits of the IP address.
12.
Press
(Select) to save those digits and move to the next three digits of the IP address.
13.
Press
(Left arrow) or (Right arrow) to enter the next three digits of the IP address.
14.
Press
(Select).
15.
The control panel will display Yes. Press
(Select) to save the configuration, or to delete and
re-enter another IP address, press
(Left arrow) or (Right arrow), which will change the
display to No.
16. After selecting the IP address, you will be prompted to enter the subnet mask and default
gateway using steps 7-14 above.
17.
If at any time during the configuration you press
(Cancel Job), the system will exit the menu
and the addresses will not be saved.
ENWW Network: How do I? 101