Filter
Top Products
Printing on cards and smaller-sized media
NOTE If you are printing on thick paper (such as cardstock), you can use the rear manual
feed slot. See
Printing with the front or rear manual feed slot.
If you wish to print to the edge of the cards, see
Printing borderless.
1 Raise the output tray and remove any media from the input tray.
2 Insert up to 60 cards, or a stack of media that does not exceed the height of the paper width
guide, print-side down along the right side of the input tray until it stops.
3
Open the small media guide by moving it 90
˚
clockwise from start to end position.
4 Press the button on top of the paper width guide and slide the guide to the right until it stops at
the edge of the cards.
5 Press the input tray lock and retract the tray until the small media guide stops at the edge of the
cards. As you retract the tray, the small media guide extends until it touches the edge of the
media.
Printing on cards and smaller-sized media 55