Filter
Top Products
+! 19
1 If you have not already done so, turn the digital sender on.
2 Press S
ETUP
(A
LT
+F4) from the main menu to go to the setup menu.
3 Press S
ETTINGS
(F2) and use the arrow keys to highlight the General configuration
menu from the list which appears. Press O
K
(F1).
4 In the configuration menu, use the arrow keys to scroll to a parameter you want to
modify and then press C
HANGE
(F3).
5 Configure the parameters by selecting a value from a list using the arrow keys or by
typing in a value.
6 When finished, press O
K
(F1). Choose another parameter from the menu.
7 When finished with the General configuration menu, press S
AVE
(F1).
8 Repeat steps 3 through 7 for the Network, E-Mail, I-Fax, and Advanced
configuration menus.