Filter
Top Products
0 41
-.)'
If e-mail or i-fax documents sent by the digital sender appear too light or too dark, the
problem may be solved by adjusting the contrast. Use this feature much the same way
you would use a similar function on a phot ocopier:decreasing the contrast lightens the
scan of the image, increasing the contrast darkens it.
$$
1 At the control panel, press S
ETUP
(A
LT
+F4). Then press S
ETTINGS
(F2).
2 Select any of the configuration menus. If an administrator password is required, the
HP Digital Sender 8100C Administrator’s Password dialog box appears.
Type the password and press O
K
(F1).
3 When the configuration menu appears, press T
OOLS
(F2).
4 Select B/W Contrast and press O
K
(F1).
5 By default, the digital sender is set to Automatic. Press E
NTER
, then use and
to switch to Manual. Press E
NTER
.
6 Use or to move to the contrast bar. Move the marker to the left to lighten
the contrast, move the marker to the right to darken the contrast.
7 Press S
AVE
(F1).
Note In general, the B/W Contrast setting should be kept on Automatic unless a contrast
adjustment is necessary to improve readability.