Filter
Top Products
20
(!),!
'
After you have physically installed the digital sender, you only need to configure a few
parameters to begin using the digital sender. After you have configured these
parameters, you will be able to send e-mail messages and use e-mail addresses located
on an LDAP server of your choosing. The e-mail parameters consist of the following
(see “
Configuration menu parameters” on pag e26 for more detailed explanations):
● Administrator E-mail (e-mail address of the administrator used to register the
digital sender)
●
Administrator Password (to restrict access to configurable parameters.)
!
●
IP configuration (to specify how the digital sender receives its TCP/IP
configuration—manually or from a DHCP or BOOTP server)
● IP Address (of the digital sender)
● IP Subnet Mask
● IP Gatewa (IP address of the gateway server used to send packets from the
local network)
● E-mail Server Add . (IP address of the SMTP-MIME e-mail server)
● E-mail Default From (default e-mail address for the FROM field of e-mail
messages from the digital sender)
● LDAP Server Address (IP address of the server that hosts the LDAP server—
not required)
● LDAP Search Root (basepoint from which to start searches for names on the
LDAP server—may be required if you configure an LDAP server address)