Filter
Top Products
Tip If the output is not borderless, then set the paper size to 5x7 Borderless or
4x6 Borderless, set the paper type to Photo Paper, set the Photo
enhancement, and then try again.
For more information on how to set the paper size, see Set the copy paper
size.
For information on how to set the paper type, see Set the copy paper type.
For information on how to set the Photo enhancement, see Enhance light
areas of your copy.
Copy a 10by 15cm (4by 6inch) photo onto a full-size
page
You can use the Fill Entire Page setting to enlarge or reduce your original to fill the
printable area of the paper size loaded in the paper tray. In this example, Fill Entire
Page is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to create a full-size
borderless copy. When copying a photo, you might want to use the photo print cartridge
for superior print quality. With the tri-color and photo print cartridges installed, you have a
six-ink system. For more information, see Use a photo print cartridge.
Note In order to achieve a borderless print without changing the proportions of the
original, the HP all-in-one might crop some of the image around the margins. In
most cases, this cropping will not be noticeable.
To copy a photo onto a full-size page from the control panel
1 Load letter or A4 photo paper in the paper tray.
Warning In order to make a borderless copy, you must have photo paper
(or other specialty paper) loaded. If the HP all-in-one detects plain paper in
the input tray, it will not make a borderless copy. Instead, your copy will
have borders.
2 Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3 Press Copy Menu to display the Copy Menu.
4 Press 2, and then press 3.
This displays the Reduce/Enlarge menu and then selects Fill Entire Page.
5 Press Start Copy Color.
Chapter 7
54 HP PSC 2350 series all-in-one
Use the copy features