Filter
Top Products
I received a message on the color graphics display to attach the control panel
overlay
Solution
This might mean the control panel overlay is not attached, or it is attached
incorrectly. Make sure to align the overlay over the buttons on the top of the
HP all-in-one and snap it firmly into place.
The color graphics display shows the wrong language
Solution
Usually, you set the language and country/region when you first set up the HP all-
in-one. However, you can change these settings at any time by using the following
procedure:
1 Press Setup.
2 Press 7, and then press 1.
This displays the Preferences menu, and then selects Set Language &
Country/Region.
You are prompted with a list of languages. You can scroll through the list of
languages by pressing the up and down arrows.
3 Press OK on the appropriate language.
4 When prompted, press 1 for Yes or 2 for No.
You are prompted with all the countries/regions for the selected language. Use
the arrow buttons on the control panel to scroll through the list.
5 Using the keypad, enter the two-digit number for the appropriate country/
region.
6 When prompted, press 1 for Yes or 2 for No.
Chapter 13
96 HP PSC 2350 series all-in-one
Troubleshooting information