Filter
Top Products
A-18
The Boot Console Interface
Displaying and Setting Paths
1 Enter
The system displays the Primary Path information, as shown:
PRIMARY PATH is now [ SCSI.6.0 ]
Key Device Path
--- -----------------------------------------
1 SCSI.6.0 QUANTUM FIREBALL1050S
2 SCSI.5.0 QUANTUM FIREBALL1050S
... .........................................
0 Previous Menu
66 Rescan for Boot devices
77 Reset the System
----------------------------------------------
To set the PRIMARY PATH, Press Key, then press
[Enter/Return]
2 Update the path by typing in a key number from the list that represents
your selection of the path/device.
For example, if you want to configure the boot console to boot from
LAN.080009-723456 as its primary selection, type 3
Enter. The follow-
ing statement appears above the menu:
PRIMARY PATH is now [ LAN.080009-723456 ]
3 Press 0 Enter to go back to the Path Configuration menu which
confirms the new selection:
==== PATH CONFIGURATION ======================
PRIMARY PATH is now [ LAN.080009-723456 ]
ALTERNATE PATH is now [ SCSI.6.0
CONSOLE PATH is now [ GRAPHICS 1 ]
KEYBOARD PATH is now [ PS/2 (0) ]