Filter
Top Products
A-27
The Boot Console Interface
Displaying the LAN Station Address
Displaying the LAN Station Address
This section provides instructions for displaying the LAN station address for
your system.
The LAN station address (“LANIC ID”) of your system is the label that
uniquely identifies the LAN connection for it at the link level (the hardware
level). It is sometimes necessary for you to supply this address to other
users. For example, if your system is to become a member of a cluster, the
cluster administrator needs to know your LAN station address to add your
system to the cluster.
Before booting your system, follow these steps to display your system’s
LAN address:
1 From the Main Menu, select Hardware Information by entering:
6 Enter
The system displays the Hardware Information menu, as shown.
==== HARDWARE INFORMATION ====================
Machine Model 9000/743
System Board Serial No. 1234567890
Cache size 128 Kbytes 128 Kbytes
Key Component
--- -----------------------------------------
CPU Rev. 2.1, Freq. 100 MHz
RAM 16 Mbytes
1 I/O ASIC
2 VME ASIC Rev. 2
GRAPHICS 1
GRAPHICS 2
Key Operation
..............................................
0 Previous Menu
77 Reset the System
----------------------------------------------
press Key, then press [Enter/Return]