Filter
Top Products
2-16
Accessories Installation
PMC Bridge Adapter and Expansion Adapter
keying pin. See Figure 2-7.
Figure 2-7 Installing a PMC Card onto the Expansion Adapter
7 The bridge adapter should NOT be assembled to the board computer. If it
is, remove it by reversing the steps shown in Figure 2-10.
8 Remove the four screws from bridge adapter VME connectors, and re-
place them with the four standoffs included in the expansion adapter kit.
See Figure 2-8.
Site 3
Site 4
O-Ring Gasket
Expansion Adapter
PMC Card
blank
Bezel