Filter
Top Products
87
5. To remove the Logic PCA Board from the Lower Chassis Case, three screws, two standoffs,
the FFC Cable T/B to M/B, and the HDD-FPC Flex must first be removed. See Figure 41 on
page 88 for the location of these components. The IR Lens and Bezel are now accessible.
CAUTION:
Apply even pressure to both sides of the HDD FPC Flex when removing or
replacing to avoid damage to the connector pins on the Logic PCA.
Figure 40 - Keyboard Shielding Plate Removal
Card Bus Bracket
F1350-60916
(OB2000 &
OB5700 only)
Keyboard
Shielding Plate
F1320-60960
Card Bus
Bracket Screw
F1320-60963
(qty 1)
Keyboard
Shielding Plate
Screws (qty 5)
F1350-60924