Filter
Top Products
97
System Resources
Below are default values for system resources. To see other, non-default possibilities, use the
System Configuration Utility (SCU) which lists port and audio device configurations in the
Input/Output menu. For additional information on configuring system resources, refer to the
System Configuration Utility section on page 48.
The tables in this section show typical resource usage as set up by the OmniBook BIOS. Plug-
and-play operating systems, drivers, and SCU settings may change some of the entries.
System Interrupts
The following tables list the available interrupts for the OmniBook 2000, 5500, and 5700.
Table 27 - System Interrupts for the OmniBook 2000 and 5700
0 System timer
1 Keyboard
2 Redirect IRQ 9
3 COM2 (IR) and COM4 (free in Win95 when docked)
4 COM1 and COM3 (serial port)
5 Crystal sound
6 Floppy drive
7 LPT1 (parallel port)
8 Real-time clock
9 MIDI
10 PCI-type interrupt: CardBus (undocked) / SCSI (docked)
11 Free
12 Mouse
13 Coprocessor
14 Internal hard disk (primary IDE controller)
15 Internal CD-ROM (secondary IDE controller)
Table 28 - System Interrupts for the OmniBook 5500
0 System timer
1 Keyboard
2 Redirect IRQ 9
3 COM2 (serial IR) and COM4 (free in Win95 when docked)
4 COM1 and COM3 (serial port)
5 Crystal sound
6 Floppy drive
7 LPT1 (parallel port)
8 Real-time clock
9 MIDI
10 Fast IR (undocked)/AMD SCSI (docked)
11 Free
12 Mouse
13 Coprocessor
14 Internal hard disk (primary IDE controller)